smbae/ADM
1
0
Fork 0
mirror of https://github.com/Dev-KATECH/ADM.git synced 2026-05-17 01:43:59 +09:00
Code Issues Actions Packages Projects Releases Wiki Activity
d9d1a078e6
ADM/GW/RTD/src/Siul2_Port_Ip.c
S2-CHICKEN 77297108b6 VCU C code first commit
2024-08-08 10:00:15 +09:00

828 lines
32 KiB
C
Raw Blame History

/*==================================================================================================
* Project : RTD AUTOSAR 4.4
* Platform : CORTEXM
* Peripheral : SIUL2
* Dependencies : none
*
* Autosar Version : 4.4.0
* Autosar Revision : ASR_REL_4_4_REV_0000
* Autosar Conf.Variant :
* SW Version : 0.9.0
* Build Version : S32K3_RTD_0_9_0__ASR_REL_4_4_REV_0000_20210326
*
* (c) Copyright 2020 - 2021 NXP Semiconductors
* All Rights Reserved.
*
* NXP Confidential. This software is owned or controlled by NXP and may only be
* used strictly in accordance with the applicable license terms. By expressly
* accepting such terms or by downloading, installing, activating and/or otherwise
* using the software, you are agreeing that you have read, and that you agree to
* comply with and are bound by, such license terms. If you do not agree to be
* bound by the applicable license terms, then you may not retain, install,
* activate or otherwise use the software.
==================================================================================================*/
/**
* @file Siul2_Port_Ip.c
*
* @addtogroup Port_IPL
* @{
*/
#ifdef __cplusplus
extern "C"{
#endif
/*==================================================================================================
* INCLUDE FILES
* 1) system and project includes
* 2) needed interfaces from external units
* 3) internal and external interfaces from this unit
==================================================================================================*/
#include "Siul2_Port_Ip.h"
#ifdef PORT_ENABLE_USER_MODE_SUPPORT
#define USER_MODE_REG_PROT_ENABLED (PORT_ENABLE_USER_MODE_SUPPORT)
#include "RegLockMacros.h"
#include "OsIf_Internal.h"
#endif
/*==================================================================================================
* SOURCE FILE VERSION INFORMATION
==================================================================================================*/
/*
* @brief Parameters that shall be published within the driver header file and also in the
* module's description file
*/
#define SIUL2_PORT_IP_VENDOR_ID_C 43
#define SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_C 4
#define SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_C 4
#define SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_C 0
#define SIUL2_PORT_IP_SW_MAJOR_VERSION_C 0
#define SIUL2_PORT_IP_SW_MINOR_VERSION_C 9
#define SIUL2_PORT_IP_SW_PATCH_VERSION_C 0
/*==================================================================================================
* FILE VERSION CHECKS
==================================================================================================*/
/* Check if the files Siul2_Port_Ip.c and Siul2_Port_Ip.h are of the same version */
#if (SIUL2_PORT_IP_VENDOR_ID_C != SIUL2_PORT_IP_VENDOR_ID_H)
#error "Siul2_Port_Ip.c and Siul2_Port_Ip.h have different vendor ids"
#endif
/* Check if Siul2_Port_Ip.c and Siul2_Port_Ip.h are of the same Autosar version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_C != SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_C != SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H) || \
(SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_C != SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_H) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.c and Siul2_Port_Ip.h are different"
#endif
/* Check if Siul2_Port_Ip.c and Siul2_Port_Ip.h are of the same Software version */
#if ((SIUL2_PORT_IP_SW_MAJOR_VERSION_C != SIUL2_PORT_IP_SW_MAJOR_VERSION_H) || \
(SIUL2_PORT_IP_SW_MINOR_VERSION_C != SIUL2_PORT_IP_SW_MINOR_VERSION_H) || \
(SIUL2_PORT_IP_SW_PATCH_VERSION_C != SIUL2_PORT_IP_SW_PATCH_VERSION_H) \
)
#error "Software Version Numbers of Siul2_Port_Ip.c and Siul2_Port_Ip.h are different"
#endif
#ifdef PORT_ENABLE_USER_MODE_SUPPORT
#ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK
/* Check if the files Siul2_Port_Ip.c and RegLockMacros.h are of the same version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_C != REGLOCKMACROS_AR_RELEASE_MAJOR_VERSION) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_C != REGLOCKMACROS_AR_RELEASE_MINOR_VERSION) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.c and RegLockMacros.h are different"
#endif
/* Check if the files Siul2_Port_Ip.c and OsIf_Internal.h are of the same version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_C != OSIF_INTERNAL_AR_RELEASE_MAJOR_VERSION) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_C != OSIF_INTERNAL_AR_RELEASE_MINOR_VERSION) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.c and OsIf_Internal.h are different"
#endif
#endif
#endif
/*==================================================================================================
* LOCAL TYPEDEFS (STRUCTURES, UNIONS, ENUMS)
==================================================================================================*/
#define SIUL2_NUM_OF_PIN_PORT 16u
#define SIUL2_MAX_NUM_OF_IMCR_REG 512u
/*==================================================================================================
* LOCAL MACROS
==================================================================================================*/
/*==================================================================================================
* LOCAL CONSTANTS
==================================================================================================*/
/*==================================================================================================
* LOCAL VARIABLES
==================================================================================================*/
#define PORT_START_SEC_CONST_32
#include "Port_MemMap.h"
#if (STD_ON == PORT_VIRTWRAPPER_SUPPORT)
/**
* @brief Base address array for Siul2 instances
*/
static const uint32 Port_au32Siul2BaseAddr[][SIUL2_PDAC_BASE_NUM] =
{
{
#ifdef SIUL2_PDAC0_BASE
SIUL2_PDAC0_BASE,
#endif
#ifdef SIUL2_PDAC1_BASE
SIUL2_PDAC1_BASE,
#endif
#ifdef SIUL2_PDAC2_BASE
SIUL2_PDAC2_BASE,
#endif
}
};
#else
/**
* @brief Base address array for Siul2 instances
*/
static const uint32 Port_au32Siul2BaseAddr[] =
{
#ifdef SIUL2_BASE
SIUL2_BASE
#endif
#ifdef SIUL2_0_BASE
SIUL2_0_BASE
#endif
#ifdef SIUL2_1_BASE
,SIUL2_1_BASE
#endif
#ifdef SIUL2_AE_BASE
,SIUL2_AE_BASE
#endif
};
#endif /* STD_ON == PORT_VIRTWRAPPER_SUPPORT */
#define PORT_STOP_SEC_CONST_32
#include "Port_MemMap.h"
#define PORT_START_SEC_VAR_NO_INIT_UNSPECIFIED
#include "Port_MemMap.h"
static const Siul2_Port_Ip_PinSettingsConfig * pPort_Setting;
#define PORT_STOP_SEC_VAR_NO_INIT_UNSPECIFIED
#include "Port_MemMap.h"
#define PORT_START_SEC_VAR_NO_INIT_32
#include "Port_MemMap.h"
static uint32 u32MaxPinConfigured;
#define PORT_STOP_SEC_VAR_NO_INIT_32
#include "Port_MemMap.h"
/*==================================================================================================
* GLOBAL CONSTANTS
==================================================================================================*/
/*==================================================================================================
* GLOBAL VARIABLES
==================================================================================================*/
/*==================================================================================================
* LOCAL FUNCTION PROTOTYPES
==================================================================================================*/
#define PORT_START_SEC_CODE
#include "Port_MemMap.h"
/*!
* @brief Initializes the pins with the given configuration structure
*
* This function configures the pins with the options provided in the
* given structure.
*
* @param[in] pinNumber the number of configured pins in structure
* @param[in] config the configuration structure
*/
static void Siul2_Port_Ip_PinInit(const Siul2_Port_Ip_PinSettingsConfig * config);
/*!
* @brief Get the MSCR configuration from the MSCR register
*
* @param[in] pinNumber the number of configured pins in structure
* @param[in] config the configuration structure
*/
static inline void Siul2_Port_Ip_GetMSCRConfiguration(Siul2_Port_Ip_PinSettingsConfig * config,
const Siul2_Port_Ip_PortType * const base,
uint16 pin);
/*==================================================================================================
* LOCAL FUNCTIONS
==================================================================================================*/
/*FUNCTION**********************************************************************
*
* Function Name : PINS_Init
* Description : This function configures the pin feature with the options
* provided in the given structure.
*
*END**************************************************************************/
static void Siul2_Port_Ip_PinInit(const Siul2_Port_Ip_PinSettingsConfig * config)
{
uint32 pinsValues = 0U;
uint8 inputMuxIterator;
uint32 imcrRegIdx;
uint8 siulInstance = 0U;
#if (STD_OFF == PORT_VIRTWRAPPER_SUPPORT)
#ifdef SIUL2_0_BASE
SIUL2_Type * imcrBase = (SIUL2_Type *)SIUL2_0_BASE;
#endif /* SIUL2_0_BASE */
#ifdef SIUL2_BASE
SIUL2_Type * imcrBase = (SIUL2_Type *)SIUL2_BASE;
#endif /* SIUL2_BASE */
#endif /* (STD_OFF == PORT_VIRTWRAPPER_SUPPORT) */
SIUL2_PORT_DEV_ASSERT((boolean)(config != NULL_PTR));
SIUL2_PORT_DEV_ASSERT((boolean)(config->pinPortIdx < SIUL2_MSCR_COUNT));
#ifdef SIUL2
if (config->base == SIUL2)
{
siulInstance = 0U;
}
#endif /* SIUL2 */
#ifdef SIUL2_0
if (config->base == SIUL2_0)
{
siulInstance = 0U;
}
#endif /* SIUL2_0 */
#ifdef SIUL2_1
else
{
siulInstance = 1U;
}
#endif /* SIUL2_1 */
if (config->pullConfig != PORT_INTERNAL_PULL_NOT_ENABLED)
{
pinsValues |= SIUL2_MSCR_PUE(1);
pinsValues |= SIUL2_MSCR_PUS(config->pullConfig);
}
pinsValues |= SIUL2_MSCR_OBE(config->outputBuffer);
#ifdef FEATURE_SIUL2_PORT_IP_HAS_INVERT_DATA
pinsValues |= SIUL2_MSCR_INV(config->invert);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_INVERT_DATA */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_PULL_KEEPER
pinsValues |= SIUL2_MSCR_PKE(config->pullKeep);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_PULL_KEEPER */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_RECEIVER_SELECT
pinsValues |= SIUL2_MSCR_RCVR(config->receiverSel);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_RECEIVER_SELECT*/
#ifdef FEATURE_SIUL2_PORT_IP_HAS_OPEN_DRAIN
pinsValues |= SIUL2_MSCR_ODE(config->openDrain);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_OPEN_DRAIN */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_DRIVE_STRENGTH
pinsValues |= SIUL2_MSCR_DSE(config->driveStrength);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_DRIVE_STRENGTH */
pinsValues |= SIUL2_MSCR_IBE(config->inputBuffer);
pinsValues |= SIUL2_MSCR_SRE(config->slewRateCtrlSel);
pinsValues |= SIUL2_MSCR_SMC(config->safeMode);
pinsValues |= SIUL2_MSCR_SSS(config->mux);
/* Configure initial value for GPIO pin in GPIO mux */
if ((PORT_MUX_AS_GPIO == config->mux) && (PORT_OUTPUT_BUFFER_ENABLED == config->outputBuffer))
{
#if (STD_ON == PORT_VIRTWRAPPER_SUPPORT)
Siul2_Port_Ip_SetGPDO(siulInstance,config->pdacSlot,(uint16)config->pinPortIdx,config->initValue);
#else
Siul2_Port_Ip_SetGPDO(siulInstance,(uint16)config->pinPortIdx,config->initValue);
#endif
}
/* Write to Multiplexed Signal Configuration Register */
config->base->MSCR[config->pinPortIdx] = pinsValues;
/* Write to Input Multiplexed Signal Configuration Register */
if (PORT_INPUT_BUFFER_ENABLED == config->inputBuffer)
{
for (inputMuxIterator = 0U; inputMuxIterator < FEATURE_SIUL2_MAX_NUMBER_OF_INPUT; inputMuxIterator++)
{
/* Check if input mux information needs to be configured */
if (PORT_INPUT_MUX_NO_INIT != config->inputMux[inputMuxIterator])
{
/* Write to Input Mux register */
imcrRegIdx = config->inputMuxReg[inputMuxIterator];
#if (STD_ON == PORT_VIRTWRAPPER_SUPPORT)
/* Config input signal */
config->base->IMCR[imcrRegIdx % SIUL2_MAX_NUM_OF_IMCR_REG] = SIUL2_IMCR_SSS(config->inputMux[inputMuxIterator]);
#else
/* If the IMCR number is higher than 512 then the IMCR register is on siul2_1 */
if (imcrRegIdx<SIUL2_MAX_NUM_OF_IMCR_REG)
{
/* Use the base address of SIUL2_0 */
#ifdef SIUL2_0_BASE
imcrBase = (SIUL2_Type *)SIUL2_0_BASE;
#endif /* SIUL2_0_BASE */
#ifdef SIUL2_BASE
imcrBase = (SIUL2_Type *)SIUL2_BASE;
#endif /* SIUL2_BASE */
}
#ifdef SIUL2_1_BASE
else
{
/* Use the base address of SIUL2_1 */
imcrBase = (SIUL2_Type *)SIUL2_1_BASE;
imcrRegIdx = imcrRegIdx - SIUL2_MAX_NUM_OF_IMCR_REG;
}
#endif /* SIUL2_1_BASE */
/* Config input signal */
imcrBase->IMCR[imcrRegIdx % SIUL2_MAX_NUM_OF_IMCR_REG] = SIUL2_IMCR_SSS(config->inputMux[inputMuxIterator]);
#endif /* (STD_ON == PORT_VIRTWRAPPER_SUPPORT) */
}
}
}
}
/*!
* @brief Initializes the pins with the given configuration structure
*
* This function configures the pins with the options provided in the
* given structure.
*
* @param[in] pinNumber the number of configured pins in structure
* @param[in] config the configuration structure
*/
static inline void Siul2_Port_Ip_GetMSCRConfiguration(Siul2_Port_Ip_PinSettingsConfig * config,
const Siul2_Port_Ip_PortType * const base,
uint16 pin)
{
uint32 u32RegVal = 0xFFFFFFFFUL;
Siul2_Port_Ip_PortPullConfig pullValue;
u32RegVal = base->MSCR[pin];
config->mux = (Siul2_Port_Ip_PortMux)((u32RegVal & SIUL2_MSCR_SSS_MASK) >> SIUL2_MSCR_SSS_SHIFT);
config->safeMode = (Siul2_Port_Ip_PortSafeMode)((u32RegVal & SIUL2_MSCR_SMC_MASK) >> SIUL2_MSCR_SMC_SHIFT);
if (0U == ((u32RegVal & SIUL2_MSCR_PUE_MASK) >> SIUL2_MSCR_PUE_SHIFT))
{
pullValue = PORT_INTERNAL_PULL_NOT_ENABLED;
}
else
{
pullValue = (Siul2_Port_Ip_PortPullConfig)((u32RegVal & SIUL2_MSCR_PUS_MASK) >> SIUL2_MSCR_PUS_SHIFT);
}
config->pullConfig = pullValue;
config->slewRateCtrlSel = (Siul2_Port_Ip_PortSlewRateControl)((u32RegVal & SIUL2_MSCR_SRE_MASK) >> SIUL2_MSCR_SRE_SHIFT);
#ifdef FEATURE_SIUL2_PORT_IP_HAS_RECEIVER_SELECT
config->receiverSel = (Siul2_Port_Ip_PortReceiverSelect)((u32RegVal & SIUL2_MSCR_RCVR_MASK) >> SIUL2_MSCR_RCVR_SHIFT);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_RECEIVER_SELECT */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_OPEN_DRAIN
config->openDrain = (Siul2_Port_Ip_PortOpenDrain)((u32RegVal & SIUL2_MSCR_ODE_MASK) >> SIUL2_MSCR_ODE_SHIFT);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_OPEN_DRAIN */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_DRIVE_STRENGTH
config->driveStrength = (Siul2_Port_Ip_PortDriveStrength)((u32RegVal & SIUL2_MSCR_DSE_MASK) >> SIUL2_MSCR_DSE_SHIFT);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_DRIVE_STRENGTH */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_INPUT_FILTER
config->inputFilter = (Siul2_Port_Ip_PortInputFilter)((u32RegVal & SIUL2_MSCR_IFE_MASK) >> SIUL2_MSCR_IFE_SHIFT);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_INPUT_FILTER */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_INVERT_DATA
config->invert = (Siul2_Port_Ip_PortInvert)((u32RegVal & SIUL2_MSCR_INV_MASK) >> SIUL2_MSCR_INV_SHIFT);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_INVERT_DATA */
#ifdef FEATURE_SIUL2_PORT_IP_HAS_PULL_KEEPER
config->pullKeep = (Siul2_Port_Ip_PortPullKeep)((u32RegVal & SIUL2_MSCR_PKE_MASK) >> SIUL2_MSCR_PKE_SHIFT);
#endif /* FEATURE_SIUL2_PORT_IP_HAS_PULL_KEEPER */
config->inputBuffer = (Siul2_Port_Ip_PortInputBuffer)((u32RegVal & SIUL2_MSCR_IBE_MASK) >> SIUL2_MSCR_IBE_SHIFT);
config->outputBuffer = (Siul2_Port_Ip_PortOutputBuffer)((u32RegVal & SIUL2_MSCR_OBE_MASK) >> SIUL2_MSCR_OBE_SHIFT);
}
#if (defined(MCAL_ENABLE_USER_MODE_SUPPORT) && defined(PORT_ENABLE_USER_MODE_SUPPORT) && (STD_ON == PORT_ENABLE_USER_MODE_SUPPORT))
#if (defined(MCAL_SIUL2_REG_PROT_AVAILABLE) && (STD_ON == MCAL_SIUL2_REG_PROT_AVAILABLE))
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_SetUserAccessAllowed
* Description : Enables SIUL2 registers writing in User Mode by configuring REG_PROT
* Sets the UAA (User Access Allowed) bit of the SIUL2 IP allowing SIUL2 registers writing in User Mode
*
*END**************************************************************************/
static void Siul2_Port_Ip_SetUserAccessAllowed(void)
{
#ifdef SIUL2_BASE
SET_USER_ACCESS_ALLOWED(SIUL2_BASE, SIUL2_PROT_MEM_U32);
#endif /* SIUL2_BASE */
#ifdef SIUL2_0_BASE
SET_USER_ACCESS_ALLOWED(SIUL2_0_BASE, SIUL2_PROT_MEM_U32);
#endif /* SIUL2_0_BASE */
#ifdef SIUL2_1_BASE
SET_USER_ACCESS_ALLOWED(SIUL2_1_BASE, SIUL2_PROT_MEM_U32);
#endif /* SIUL2_1_BASE */
#ifdef SIUL2_AE_BASE
#if(STD_ON == PORT_SIUL2_AE_ENABLED)
SET_USER_ACCESS_ALLOWED(SIUL2_AE_BASE, SIUL2_AE_PROT_MEM_U32);
#endif /* (STD_ON == PORT_SIUL2_AE_ENABLED) */
#endif /* SIUL2_AE_BASE */
}
#endif /* (defined(MCAL_SIUL2_REG_PROT_AVAILABLE) && (STD_ON == MCAL_SIUL2_REG_PROT_AVAILABLE)) */
#endif /* (defined(MCAL_ENABLE_USER_MODE_SUPPORT) && defined(PORT_ENABLE_USER_MODE_SUPPORT) && (STD_ON == PORT_ENABLE_USER_MODE_SUPPORT)) */
/*==================================================================================================
* GLOBAL FUNCTIONS
==================================================================================================*/
#if (STD_ON == PORT_VIRTWRAPPER_SUPPORT)
void Siul2_Port_Ip_SetMSCR(uint8 SiulInstance, uint8 PdacSlot, uint16 MscrInstance, uint32 value)
{
/* Write the value into MSCR register */
PORT_WRITE32(SIUL2_MSCR_ADDR32(SiulInstance, PdacSlot, (uint32)MscrInstance),value);
}
uint32 Siul2_Port_Ip_ReadMSCR(uint8 SiulInstance, uint8 PdacSlot, uint16 MscrInstance)
{
/* Return the value from MSCR register with MscrInstance */
return PORT_READ32(SIUL2_MSCR_ADDR32(SiulInstance, PdacSlot, (uint32)MscrInstance));
}
void Siul2_Port_Ip_SetIMCR(uint8 SiulInstance, uint8 PdacSlot, uint16 ImcrInstance, uint32 value)
{
/* Write the value into IMCR register */
PORT_WRITE32(SIUL2_IMCR_ADDR32(SiulInstance, PdacSlot, (uint32)ImcrInstance),value);
}
void Siul2_Port_Ip_SetGPDO(uint8 SiulInstance, uint8 PdacSlot, uint16 GpdoInstance, uint8 value)
{
/* If the value is low or high */
if (value != PORT_PIN_LEVEL_NOTCHANGED_U8)
{
/* Write the value into GPDO register */
PORT_WRITE8(SIUL2_GPDO_ADDR8(SiulInstance, PdacSlot, GpdoInstance),value);
}
}
#else
void Siul2_Port_Ip_SetMSCR(uint8 SiulInstance, uint16 MscrInstance, uint32 value)
{
/* Write the value into MSCR register */
PORT_WRITE32(SIUL2_MSCR_ADDR32(SiulInstance,(uint32)MscrInstance),value);
}
uint32 Siul2_Port_Ip_ReadMSCR(uint8 SiulInstance, uint16 MscrInstance)
{
/* Return the value from MSCR register with MscrInstance */
return PORT_READ32(SIUL2_MSCR_ADDR32(SiulInstance,(uint32)MscrInstance));
}
void Siul2_Port_Ip_SetIMCR(uint8 SiulInstance, uint16 ImcrInstance, uint32 value)
{
/* Write the value into IMCR register */
PORT_WRITE32(SIUL2_IMCR_ADDR32(SiulInstance,(uint32)ImcrInstance),value);
}
void Siul2_Port_Ip_SetGPDO(uint8 SiulInstance, uint16 GpdoInstance, uint8 value)
{
/* If the value is low or high */
if (value != PORT_PIN_LEVEL_NOTCHANGED_U8)
{
/* Write the value into GPDO register */
PORT_WRITE8(SIUL2_GPDO_ADDR8(SiulInstance,GpdoInstance),value);
}
}
#endif
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_Init
* Description : This function configures the pins with the options provided
* in the given structure.
*
* @implements Siul2_Port_Ip_Init_Activity
*END**************************************************************************/
Siul2_Port_Ip_PortStatusType Siul2_Port_Ip_Init(uint32 pinCount,
const Siul2_Port_Ip_PinSettingsConfig config[])
{
uint32 i;
#if (defined(MCAL_ENABLE_USER_MODE_SUPPORT) && defined(PORT_ENABLE_USER_MODE_SUPPORT) && (STD_ON == PORT_ENABLE_USER_MODE_SUPPORT))
#if (defined(MCAL_SIUL2_REG_PROT_AVAILABLE) && (STD_ON == MCAL_SIUL2_REG_PROT_AVAILABLE))
/* Enable register access from user mode, if enabled from configuration file */
OsIf_Trusted_Call(Siul2_Port_Ip_SetUserAccessAllowed);
#endif /* (defined(MCAL_SIUL2_REG_PROT_AVAILABLE) && (STD_ON == MCAL_SIUL2_REG_PROT_AVAILABLE)) */
#endif /* (defined(MCAL_ENABLE_USER_MODE_SUPPORT) && defined(PORT_ENABLE_USER_MODE_SUPPORT) && (STD_ON == PORT_ENABLE_USER_MODE_SUPPORT)) */
/* Store the configuration pointer */
pPort_Setting = config;
/* Store the number of configured pins */
u32MaxPinConfigured = pinCount;
for (i = 0U; i < pinCount; i++)
{
Siul2_Port_Ip_PinInit(&config[i]);
}
return SIUL2_PORT_SUCCESS;
}
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_SetPullSel
* Description : This function configures the internal resistor.
*
* @implements Siul2_Port_Ip_SetPullSel_Activity
*END**************************************************************************/
void Siul2_Port_Ip_SetPullSel(Siul2_Port_Ip_PortType * const base,
uint16 pin,
Siul2_Port_Ip_PortPullConfig pullConfig)
{
uint32 regVal;
uint32 pueVal;
uint32 pusVal;
SIUL2_PORT_DEV_ASSERT((boolean)(base != NULL_PTR));
SIUL2_PORT_DEV_ASSERT((boolean)(pin < SIUL2_NUM_OF_PIN_PORT));
/* If that pin belong to SIUL2_AE*/
#ifdef FEATURE_SIUL2_HAS_AE_INSTANCE
if ((uint32)base > (uint32)SIUL2_AE)
{
pueVal = SIUL2_AE_MSCR_PUE_MASK;
pusVal = SIUL2_AE_MSCR_PUS_MASK;
}
else
#endif /* FEATURE_SIUL2_HAS_AE_INSTANCE */
{
pueVal = SIUL2_MSCR_PUE_MASK;
pusVal = SIUL2_MSCR_PUS_MASK;
}
switch (pullConfig)
{
case PORT_INTERNAL_PULL_NOT_ENABLED:
{
/* Clear the Pull Enable bit field */
base->MSCR[pin] &= ~pueVal;
break;
}
case PORT_INTERNAL_PULL_DOWN_ENABLED:
{
regVal = base->MSCR[pin];
/* Set the Pull Enable bit field */
regVal |= pueVal;
/* Clear the Pull Select bit field */
regVal &= ~pusVal;
base->MSCR[pin] = regVal;
break;
}
case PORT_INTERNAL_PULL_UP_ENABLED:
{
regVal = base->MSCR[pin];
/* Set the Pull Enable bit field */
regVal |= pueVal;
/* Set the Pull Select bit field */
regVal |= pusVal;
base->MSCR[pin] = regVal;
break;
}
default:
/* Invalid command */
SIUL2_PORT_DEV_ASSERT(FALSE);
break;
}
}
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_SetOutputBuffer
* Description : This function configures the output buffer.
*
* @implements Siul2_Port_Ip_SetOutputBuffer_Activity
*END**************************************************************************/
void Siul2_Port_Ip_SetOutputBuffer(Siul2_Port_Ip_PortType * const base,
uint16 pin,
boolean enable,
Siul2_Port_Ip_PortMux mux)
{
SIUL2_PORT_DEV_ASSERT((boolean)(base != NULL_PTR));
SIUL2_PORT_DEV_ASSERT((boolean)(pin < SIUL2_NUM_OF_PIN_PORT));
{
/* Clear the OBE bit field */
base->MSCR[pin] &= ~SIUL2_MSCR_OBE_MASK;
/* Write the OBE bit field with enable */
base->MSCR[pin] |= SIUL2_MSCR_OBE(enable ? 1UL : 0UL);
}
/* Clear the SSS bit field */
base->MSCR[pin] &= ~SIUL2_MSCR_SSS_MASK;
/* Write the SSS bit field with mux */
base->MSCR[pin] |= SIUL2_MSCR_SSS(mux);
}
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_SetInputBuffer
* Description : This function configures the input buffer.
*
* @implements Siul2_Port_Ip_SetInputBuffer_Activity
*END**************************************************************************/
void Siul2_Port_Ip_SetInputBuffer(Siul2_Port_Ip_PortType * const base,
uint16 pin,
boolean enable,
uint32 inputMuxReg,
Siul2_Port_Ip_PortInputMux inputMux)
{
/* Dummy address */
SIUL2_Type * siul2Base = (SIUL2_Type *)0xFFFFFFFFU;
uint32 imcrRegIdx = inputMuxReg;
uint32 imcrVal;
SIUL2_PORT_DEV_ASSERT((boolean)(pin < SIUL2_NUM_OF_PIN_PORT));
if (base != NULL_PTR)
{
/* Enable/disable input buffer for input signal */
base->MSCR[pin] &= ~SIUL2_MSCR_IBE_MASK;
base->MSCR[pin] |= SIUL2_MSCR_IBE(enable ? 1UL : 0UL);
}
/* Check input mux to configure input signal */
if (inputMux != PORT_INPUT_MUX_NO_INIT)
{
if (imcrRegIdx < SIUL2_MAX_NUM_OF_IMCR_REG)
{
#ifdef SIUL2_0_BASE
siul2Base = (SIUL2_Type *)SIUL2_0_BASE;
#endif /* SIUL2_0_BASE */
#ifdef SIUL2_BASE
siul2Base = (SIUL2_Type *)SIUL2_BASE;
#endif /* SIUL2_BASE */
}
#ifdef SIUL2_1_BASE
else
{
siul2Base = (SIUL2_Type *)SIUL2_1_BASE;
}
#endif /* SIUL2_1_BASE */
/* Configure input mux */
imcrVal = siul2Base->IMCR[imcrRegIdx % SIUL2_MAX_NUM_OF_IMCR_REG];
imcrVal &= ~SIUL2_IMCR_SSS_MASK;
imcrVal |= SIUL2_IMCR_SSS(inputMux);
siul2Base->IMCR[imcrRegIdx % SIUL2_MAX_NUM_OF_IMCR_REG] = imcrVal;
}
}
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_SetPinDirection
* Description : This function configures the pin direction
*
* @implements Siul2_Port_Ip_SetPinDirection_Activity
*END**************************************************************************/
void Siul2_Port_Ip_SetPinDirection(Siul2_Port_Ip_PortType * const base,
uint16 pin,
Siul2_Port_Ip_PortDirectionType direction)
{
SIUL2_PORT_DEV_ASSERT((boolean)(base != NULL_PTR));
SIUL2_PORT_DEV_ASSERT((boolean)(pin < SIUL2_NUM_OF_PIN_PORT));
switch (direction)
{
/* Direction pin IN */
case SIUL2_PORT_IN:
base->MSCR[pin] &= ~SIUL2_MSCR_OBE_MASK;
base->MSCR[pin] |= SIUL2_MSCR_IBE(1UL);
break;
/* Direction pin OUT */
case SIUL2_PORT_OUT:
base->MSCR[pin] &= ~SIUL2_MSCR_IBE_MASK;
base->MSCR[pin] |= SIUL2_MSCR_OBE(1UL);
break;
/* Direction pin IN OUT */
case SIUL2_PORT_IN_OUT:
base->MSCR[pin] |= (SIUL2_MSCR_IBE_MASK | SIUL2_MSCR_OBE_MASK);
break;
/* Direction pin HI_Z */
case SIUL2_PORT_HI_Z:
base->MSCR[pin] &= ~(SIUL2_MSCR_IBE_MASK | SIUL2_MSCR_OBE_MASK);
break;
default:
/* Do nothing */
break;
}
}
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_RevertPinConfiguration
* Description : This function configures the pin configuration with the values from the configuration structure
*
* @implements Siul2_Port_Ip_RevertPinConfiguration_Activity
*END**************************************************************************/
uint32 Siul2_Port_Ip_RevertPinConfiguration(const Siul2_Port_Ip_PortType * const base,
uint16 pin)
{
uint16 u16PinIdx;
uint32 u32RegVal = 0xFFFFFFFFUL;
const Siul2_Port_Ip_PinSettingsConfig * ConfigPtr = pPort_Setting;
uint32 MaxPinConfigured = u32MaxPinConfigured;
uint32 portNumber;
uint32 u32MscrId;
SIUL2_PORT_DEV_ASSERT((boolean)(base != NULL_PTR));
SIUL2_PORT_DEV_ASSERT((boolean)(pin < SIUL2_NUM_OF_PIN_PORT));
/* Get the PortID: Subtract the address of the first mscr from the base parameter then divide to 4 and 16 because there are 16 ports but each MSCR has 4 bytes */
#if (2 == SIUL2_NUM_SIUL2_INSTANCES_U8)
/* Check if that pin is belong to SIUL2_1 or SIUL2_0 */
if(base > (Siul2_Port_Ip_PortType *)SIUL2_1_BASE)
{
portNumber = (uint32)((uint32)((uint32)((uint32)base - (uint32)SIUL2_1_MSCR_BASE) >> 2U) >> 4U);
}
else
{
portNumber = (uint32)((uint32)((uint32)((uint32)base - (uint32)SIUL2_0_MSCR_BASE) >> 2U) >> 4U);
}
#else
portNumber = (uint32)((uint32)((uint32)((uint32)base - (uint32)SIUL2_MSCR_BASE) >> 2U) >> 4U);
#endif
/* Get the MscrID: 16 is the maximum number of pins per port so the portNumber need to multiply 16 */
u32MscrId = (portNumber << 4U) + (uint32)pin;
/* The loop to find the Mscr Id in pin configuration's structure */
for(u16PinIdx = 0U; u16PinIdx < MaxPinConfigured; u16PinIdx++)
{
/* If we found that pin */
if(ConfigPtr[u16PinIdx].pinPortIdx == u32MscrId)
{
Siul2_Port_Ip_PinInit(&ConfigPtr[u16PinIdx]);
u32RegVal = base->MSCR[pin];
/* Break the loop. Do not need to search in all pin configuration's structure */
break;
}
}
/* Return the MSCR value */
return u32RegVal;
}
/*FUNCTION**********************************************************************
*
* Function Name : Siul2_Port_Ip_GetPinConfiguration
* Description : This function returns the value of the pin configuration register.
*
* @implements Siul2_Port_Ip_GetPinConfiguration_Activity
*END**************************************************************************/
void Siul2_Port_Ip_GetPinConfiguration(const Siul2_Port_Ip_PortType * const base,
Siul2_Port_Ip_PinSettingsConfig * config,
uint16 pin)
{
const Siul2_Port_Ip_PinSettingsConfig * ConfigPtr = pPort_Setting;
uint32 MaxPinConfigured = u32MaxPinConfigured;
uint32 portNumber;
uint32 u32MscrId;
uint32 u32MscrBase;
uint16 u16PinIdx;
uint8 inputMuxIterator;
SIUL2_PORT_DEV_ASSERT((boolean)(base != NULL_PTR));
SIUL2_PORT_DEV_ASSERT((boolean)(pin < SIUL2_NUM_OF_PIN_PORT));
/* Choose the MSCR base address for the pin */
#if (2 == SIUL2_NUM_SIUL2_INSTANCES_U8)
if(base > (Siul2_Port_Ip_PortType *)SIUL2_1_BASE)
{
u32MscrBase = (uint32)SIUL2_1_MSCR_BASE;
}
else
{
u32MscrBase = (uint32)SIUL2_0_MSCR_BASE;
}
#else
u32MscrBase = (uint32)SIUL2_MSCR_BASE;
#endif
/* Get the PortID: Subtract the address of the first mscr from the base parameter then divide to 4 and 16 because there are 16 ports and each MSCR has 4 bytes */
portNumber = (uint32)((uint32)base - u32MscrBase) / 64UL;
/* Get the MscrID: 16 is the maximum number of pins per port so the portNumber need to multiply 16 */
u32MscrId = (portNumber << 4U) + (uint32)pin;
for(u16PinIdx = 0U; u16PinIdx < MaxPinConfigured; u16PinIdx++)
{
/* If that pin was found */
if(ConfigPtr[u16PinIdx].pinPortIdx == u32MscrId)
{
config->base = ConfigPtr[u16PinIdx].base;
config->pinPortIdx = ConfigPtr[u16PinIdx].pinPortIdx;
config->initValue = ConfigPtr[u16PinIdx].initValue;
for (inputMuxIterator = 0U; inputMuxIterator < FEATURE_SIUL2_MAX_NUMBER_OF_INPUT; inputMuxIterator++)
{
config->inputMuxReg[inputMuxIterator] = ConfigPtr[u16PinIdx].inputMuxReg[inputMuxIterator];
config->inputMux[inputMuxIterator] = ConfigPtr[u16PinIdx].inputMux[inputMuxIterator];
}
/* Get the MSCR configuration from register */
Siul2_Port_Ip_GetMSCRConfiguration(config, base, pin);
break;
}
}
}
#define PORT_STOP_SEC_CODE
#include "Port_MemMap.h"
#ifdef __cplusplus
}
#endif
/** @} */
Reference in New Issue View Git Blame Copy Permalink