smbae/ADM
1
0
Fork 0
mirror of https://github.com/Dev-KATECH/ADM.git synced 2026-05-17 01:43:59 +09:00
Code Issues Actions Packages Projects Releases Wiki Activity
feature/AccControl
ADM/GW/RTD/include/Siul2_Port_Ip.h
S2-CHICKEN 77297108b6 VCU C code first commit
2024-08-08 10:00:15 +09:00

430 lines
16 KiB
C
Raw Permalink Blame History

/*==================================================================================================
* Project : RTD AUTOSAR 4.4
* Platform : CORTEXM
* Peripheral : SIUL2
* Dependencies : none
*
* Autosar Version : 4.4.0
* Autosar Revision : ASR_REL_4_4_REV_0000
* Autosar Conf.Variant :
* SW Version : 0.9.0
* Build Version : S32K3_RTD_0_9_0__ASR_REL_4_4_REV_0000_20210326
*
* (c) Copyright 2020 - 2021 NXP Semiconductors
* All Rights Reserved.
*
* NXP Confidential. This software is owned or controlled by NXP and may only be
* used strictly in accordance with the applicable license terms. By expressly
* accepting such terms or by downloading, installing, activating and/or otherwise
* using the software, you are agreeing that you have read, and that you agree to
* comply with and are bound by, such license terms. If you do not agree to be
* bound by the applicable license terms, then you may not retain, install,
* activate or otherwise use the software.
==================================================================================================*/
#ifndef SIUL2_PORT_IP_H
#define SIUL2_PORT_IP_H
/**
* @file Siul2_Port_Ip.h
*
* @defgroup Port_IPL Port IPL
* @{
*/
#if defined(__cplusplus)
extern "C" {
#endif
/*==================================================================================================
* INCLUDE FILES
* 1) system and project includes
* 2) needed interfaces from external units
* 3) internal and external interfaces from this unit
==================================================================================================*/
#include "StandardTypes.h"
#include "Siul2_Port_Ip_Cfg.h"
#include "Siul2_Port_Ip_Types.h"
#include "Siul2_Port_Ip_Defines.h"
#include "Devassert.h"
/*==================================================================================================
* SOURCE FILE VERSION INFORMATION
==================================================================================================*/
/*
* @brief Parameters that shall be published within the driver header file and also in the
* module's description file
*/
#define SIUL2_PORT_IP_VENDOR_ID_H 43
#define SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H 4
#define SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H 4
#define SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_H 0
#define SIUL2_PORT_IP_SW_MAJOR_VERSION_H 0
#define SIUL2_PORT_IP_SW_MINOR_VERSION_H 9
#define SIUL2_PORT_IP_SW_PATCH_VERSION_H 0
/*==================================================================================================
* FILE VERSION CHECKS
==================================================================================================*/
#ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK
/* Check if the files Siul2_Port_Ip.h and StandardTypes.h are of the same version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H != STD_AR_RELEASE_MAJOR_VERSION) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H != STD_AR_RELEASE_MINOR_VERSION) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.h and StandardTypes.h are different"
#endif
/* Check if the files Siul2_Port_Ip.h and Devassert.h are of the same version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H != DEVASSERT_AR_RELEASE_MAJOR_VERSION) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H != DEVASSERT_AR_RELEASE_MINOR_VERSION) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.h and Devassert.h are different"
#endif
#endif
/* Check if the files Siul2_Port_Ip.h and Siul2_Port_Ip_Cfg.h are of the same version */
#if (SIUL2_PORT_IP_VENDOR_ID_H != SIUL2_PORT_IP_VENDOR_ID_CFG_H)
#error "Siul2_Port_Ip.h and Siul2_Port_Ip_Cfg.h have different vendor ids"
#endif
/* Check if Siul2_Port_Ip.h and Siul2_Port_Ip_Cfg.h are of the same Autosar version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H != SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_CFG_H) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H != SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_CFG_H) || \
(SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_H != SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_CFG_H) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.h and Siul2_Port_Ip_Cfg.h are different"
#endif
/* Check if Siul2_Port_Ip.h and Siul2_Port_Ip_Cfg.h are of the same Software version */
#if ((SIUL2_PORT_IP_SW_MAJOR_VERSION_H != SIUL2_PORT_IP_SW_MAJOR_VERSION_CFG_H) || \
(SIUL2_PORT_IP_SW_MINOR_VERSION_H != SIUL2_PORT_IP_SW_MINOR_VERSION_CFG_H) || \
(SIUL2_PORT_IP_SW_PATCH_VERSION_H != SIUL2_PORT_IP_SW_PATCH_VERSION_CFG_H) \
)
#error "Software Version Numbers of Siul2_Port_Ip.h and Siul2_Port_Ip_Cfg.h are different"
#endif
/* Check if the files Siul2_Port_Ip.h and Siul2_Port_Ip_Types.h are of the same version */
#if (SIUL2_PORT_IP_VENDOR_ID_H != SIUL2_PORT_IP_TYPES_VENDOR_ID_H)
#error "Siul2_Port_Ip.h and Siul2_Port_Ip_Types.h have different vendor ids"
#endif
/* Check if Siul2_Port_Ip.h and Siul2_Port_Ip_Types.h are of the same Autosar version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H != SIUL2_PORT_IP_TYPES_AR_RELEASE_MAJOR_VERSION_H) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H != SIUL2_PORT_IP_TYPES_AR_RELEASE_MINOR_VERSION_H) || \
(SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_H != SIUL2_PORT_IP_TYPES_AR_RELEASE_REVISION_VERSION_H) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.h and Siul2_Port_Ip_Types.h are different"
#endif
/* Check if Siul2_Port_Ip.h and Siul2_Port_Ip_Types.h are of the same Software version */
#if ((SIUL2_PORT_IP_SW_MAJOR_VERSION_H != SIUL2_PORT_IP_TYPES_SW_MAJOR_VERSION_H) || \
(SIUL2_PORT_IP_SW_MINOR_VERSION_H != SIUL2_PORT_IP_TYPES_SW_MINOR_VERSION_H) || \
(SIUL2_PORT_IP_SW_PATCH_VERSION_H != SIUL2_PORT_IP_TYPES_SW_PATCH_VERSION_H) \
)
#error "Software Version Numbers of Siul2_Port_Ip.h and Siul2_Port_Ip_Types.h are different"
#endif
/* Check if the files Siul2_Port_Ip.h and Siul2_Port_Ip_Defines.h are of the same version */
#if (SIUL2_PORT_IP_VENDOR_ID_H != SIUL2_PORT_IP_DEFINES_VENDOR_ID_H)
#error "Siul2_Port_Ip.h and Siul2_Port_Ip_Defines.h have different vendor ids"
#endif
/* Check if Siul2_Port_Ip.h and Siul2_Port_Ip_Defines.h are of the same Autosar version */
#if ((SIUL2_PORT_IP_AR_RELEASE_MAJOR_VERSION_H != SIUL2_PORT_IP_DEFINES_AR_RELEASE_MAJOR_VERSION_H) || \
(SIUL2_PORT_IP_AR_RELEASE_MINOR_VERSION_H != SIUL2_PORT_IP_DEFINES_AR_RELEASE_MINOR_VERSION_H) || \
(SIUL2_PORT_IP_AR_RELEASE_REVISION_VERSION_H != SIUL2_PORT_IP_DEFINES_AR_RELEASE_REVISION_VERSION_H) \
)
#error "AutoSar Version Numbers of Siul2_Port_Ip.h and Siul2_Port_Ip_Defines.h are different"
#endif
/* Check if Siul2_Port_Ip.h and Siul2_Port_Ip_Defines.h are of the same Software version */
#if ((SIUL2_PORT_IP_SW_MAJOR_VERSION_H != SIUL2_PORT_IP_DEFINES_SW_MAJOR_VERSION_H) || \
(SIUL2_PORT_IP_SW_MINOR_VERSION_H != SIUL2_PORT_IP_DEFINES_SW_MINOR_VERSION_H) || \
(SIUL2_PORT_IP_SW_PATCH_VERSION_H != SIUL2_PORT_IP_DEFINES_SW_PATCH_VERSION_H) \
)
#error "Software Version Numbers of Siul2_Port_Ip.h and Siul2_Port_Ip_Defines.h are different"
#endif
/*==================================================================================================
* CONSTANTS
==================================================================================================*/
/*==================================================================================================
* DEFINES AND MACROS
==================================================================================================*/
#define PORT_WRITE8(address, value) ((*(volatile uint8*)(address))= (value))
#define PORT_WRITE32(address, value) ((*(volatile uint32*)(address))= (value))
#define PORT_READ32(address) (*(volatile uint32*)(address))
#if (STD_ON == PORT_VIRTWRAPPER_SUPPORT)
#define SIUL2_MSCR_ADDR32(INSTANCE, PDAC, PIN) ((uint32)Port_au32Siul2BaseAddr[(INSTANCE)][(PDAC)] + (uint32)0x0240UL + (uint32)((PIN)<<2))
#define SIUL2_IMCR_ADDR32(INSTANCE,PDAC, PIN) ((uint32)Port_au32Siul2BaseAddr[(INSTANCE)][(PDAC)] + (uint32)0x0A40UL + (uint32)((PIN)<<2))
#define SIUL2_GPDO_ADDR8(INSTANCE, PDAC, PIN) ((uint32)Port_au32Siul2BaseAddr[(INSTANCE)][(PDAC)] + (uint32)0x1300UL + (((PIN) & ~3UL) | (~((PIN) & 3UL) & 3UL)))
#else
#define SIUL2_MSCR_ADDR32(INSTANCE, PIN) ((uint32)Port_au32Siul2BaseAddr[(INSTANCE)] + (uint32)0x0240UL + (uint32)((PIN)<<2))
#define SIUL2_IMCR_ADDR32(INSTANCE, PIN) ((uint32)Port_au32Siul2BaseAddr[(INSTANCE)] + (uint32)0x0A40UL + (uint32)((PIN)<<2))
#define SIUL2_GPDO_ADDR8(INSTANCE, PIN) ((uint32)Port_au32Siul2BaseAddr[(INSTANCE)] + (uint32)0x1300UL + (((PIN) & ~3UL) | (~((PIN) & 3UL) & 3UL)))
#endif /* STD_ON == PORT_VIRTWRAPPER_SUPPORT */
/* @brief Mask definitions for IMCR bit field SSS */
#define SIUL2_IMCR_SSS_U32 ((uint32)0x00000007U)
#define SIUL2_IMCR_SSS_OFFSET_U32 ((uint32)0)
#ifdef SIUL2_PORT_IP_S32K3XX_PLATFORM
#define PORT_PIN_LEVEL_LOW_U8 ((uint8)0) /**< @brief Sets port pin in '0' logic. */
#define PORT_PIN_LEVEL_HIGH_U8 ((uint8)1) /**< @brief Sets port pin in '1' logic. */
#endif
#define PORT_PIN_LEVEL_NOTCHANGED_U8 ((uint8)2) /**< @brief Not changed port pin logic. */
#if (SIUL2_PORT_IP_DEV_ERROR_DETECT == STD_ON)
#define SIUL2_PORT_DEV_ASSERT(par) DevAssert(par)
#else
#define SIUL2_PORT_DEV_ASSERT(par)
#endif
/*==================================================================================================
* ENUMS
==================================================================================================*/
/*==================================================================================================
* STRUCTURES AND OTHER TYPEDEFS
==================================================================================================*/
/*==================================================================================================
* GLOBAL VARIABLE DECLARATIONS
==================================================================================================*/
/*==================================================================================================
* FUNCTION PROTOTYPES
==================================================================================================*/
/* @brief Allocate defined section for PORT code. */
#define PORT_START_SEC_CODE
#include "Port_MemMap.h"
#if (STD_ON == PORT_VIRTWRAPPER_SUPPORT)
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
void Siul2_Port_Ip_SetMSCR(uint8 SiulInstance, uint8 PdacSlot, uint16 MscrInstance,uint32 value);
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
void Siul2_Port_Ip_SetIMCR(uint8 SiulInstance, uint8 PdacSlot, uint16 ImcrInstance,uint32 value);
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
void Siul2_Port_Ip_SetGPDO(uint8 SiulInstance, uint8 PdacSlot, uint16 GpdoInstance,uint8 value);
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
uint32 Siul2_Port_Ip_ReadMSCR(uint8 SiulInstance, uint8 PdacSlot, uint16 MscrInstance);
#else
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
void Siul2_Port_Ip_SetMSCR(uint8 SiulInstance, uint16 MscrInstance,uint32 value);
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
void Siul2_Port_Ip_SetIMCR(uint8 SiulInstance, uint16 ImcrInstance,uint32 value);
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
void Siul2_Port_Ip_SetGPDO(uint8 SiulInstance, uint16 GpdoInstance,uint8 value);
/*!
* @brief
*
* @details
*
*
* @param[in]
*
* @return void
*
*
**/
uint32 Siul2_Port_Ip_ReadMSCR(uint8 SiulInstance, uint16 MscrInstance);
#endif /*(STD_ON == PORT_VIRTWRAPPER_SUPPORT)*/
/*!
* @brief Configures the internal resistor.
*
* This function configures the internal resistor.
*
* @param[in] base Port base pointer (PORTA, PORTB, PORTA_AE, etc.)
* @param[in] pin Port pin number
* @param[in] pullConfig The pull configuration
*/
void Siul2_Port_Ip_SetPullSel(Siul2_Port_Ip_PortType * const base,
uint16 pin,
Siul2_Port_Ip_PortPullConfig pullConfig);
/*!
* @brief Configures the output buffer and output signal.
*
* This function configures the output buffer for the pin
* and the path for output signal from module to pin
*
* @param[in] base Port base pointer (PORTA, PORTB, PORTA_AE, etc.)
* @param[in] pin Port pin number
* @param[in] enable Enable output buffer
* @param[in] mux Pin muxing slot selection
*/
void Siul2_Port_Ip_SetOutputBuffer(Siul2_Port_Ip_PortType * const base,
uint16 pin,
boolean enable,
Siul2_Port_Ip_PortMux mux);
/*!
* @brief Configures the input buffer and input signal.
*
* This function configures the input buffer for the pin
* and the path for input signal from pin to module
*
* @param[in] base Port base pointer (PORTA, PORTB, PORTA_AE, etc.),
* NULL if disabling inputMux only
* @param[in] pin Port pin number
* @param[in] enable Enable input buffer
* @param[in] inputMuxReg Pin muxing register slot selection
* @param[in] inputMux Pin muxing slot selection
*
* @note: There are some pins controlled by both SIUL2_0 and SIUL2_1 instances
* In order to configure correctly and be consistent with other platforms, the
* inputMuxReg parameter of SIUL2_1 instance must be added 512 units.
* For example: The actual inputMuxReg is 10 then the value there must be (10 + 512)
*/
void Siul2_Port_Ip_SetInputBuffer(Siul2_Port_Ip_PortType * const base,
uint16 pin,
boolean enable,
uint32 inputMuxReg,
Siul2_Port_Ip_PortInputMux inputMux);
/*!
* @brief Initializes the pins with the given configuration structure
*
* This function configures the pins with the options provided in the
* provided structure.
*
* @param[in] pinCount The number of configured pins in structure
* @param[in] config The configuration structure
* @return The status of the operation
*/
Siul2_Port_Ip_PortStatusType Siul2_Port_Ip_Init(uint32 pinCount,
const Siul2_Port_Ip_PinSettingsConfig config[]);
/*!
* @brief Configures the pin with the values form the configuration structure
*
* This function configures the pin configuration with the values form the configuration structure
*
* @param[in] base Port base pointer
* @param[in] pin Port pin number
* @param[in] direction The direction of pin
* @return void
*/
void Siul2_Port_Ip_SetPinDirection(Siul2_Port_Ip_PortType * const base,
uint16 pin,
Siul2_Port_Ip_PortDirectionType direction);
/*!
* @brief This function configures the pin configuration with the values from the configuration structure
*
* This function configures the pin configuration with the values from the configuration structure
*
* @param[in] base Port base pointer
* @param[in] pin Port pin number
* @return MSCR register value
*/
uint32 Siul2_Port_Ip_RevertPinConfiguration(const Siul2_Port_Ip_PortType * const base,
uint16 pin);
/*!
* @brief This function shall return the value of the pin configuration register.
*
* This function shall return the value of the pin configuration register.
*
* @param[in] base Port base pointer
* @param[in] pin Port pin number
* @param[out] config->pointer to output configuration structure information
* @return MSCR register value
*/
void Siul2_Port_Ip_GetPinConfiguration(const Siul2_Port_Ip_PortType * const base,
Siul2_Port_Ip_PinSettingsConfig * config,
uint16 pin);
#define PORT_STOP_SEC_CODE
#include "Port_MemMap.h"
#if defined(__cplusplus)
}
#endif
/** @} */
#endif /* SIUL2_PORT_IP_H */
Reference in New Issue View Git Blame Copy Permalink