/*================================================================================================== * Project : RTD AUTOSAR 4.4 * Platform : CORTEXM * Peripheral : FLEXIO * Dependencies : * * Autosar Version : 4.4.0 * Autosar Revision : ASR_REL_4_4_REV_0000 * Autosar Conf.Variant : * SW Version : 0.9.0 * Build Version : S32K3_RTD_0_9_0__ASR_REL_4_4_REV_0000_20210326 * * (c) Copyright 2020 - 2021 NXP Semiconductors * All Rights Reserved. * * NXP Confidential. This software is owned or controlled by NXP and may only be * used strictly in accordance with the applicable license terms. By expressly * accepting such terms or by downloading, installing, activating and/or otherwise * using the software, you are agreeing that you have read, and that you agree to * comply with and are bound by, such license terms. If you do not agree to be * bound by the applicable license terms, then you may not retain, install, * activate or otherwise use the software. ==================================================================================================*/ /** * @file Lpuart_Uart_Ip_PBcfg.c * @defgroup lpuart_uart_ip Lpuart UART IPL * @addtogroup lpuart_uart_ip Lpuart UART IPL * @{ */ #ifdef __cplusplus extern "C" { #endif /*================================================================================================== INCLUDE FILES 1) system and project includes 2) needed interfaces from external units 3) internal and external interfaces from this unit ==================================================================================================*/ #include "Lpuart_Uart_Ip_Types.h" #include "Lpuart_Uart_Ip_Cfg.h" #include "StandardTypes.h" #if (LPUART_UART_IP_HAS_DMA_ENABLED == STD_ON) #include "Dma_Ip.h" #endif /*================================================================================================== * SOURCE FILE VERSION INFORMATION ==================================================================================================*/ #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_VENDOR_ID_C 43 #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_MAJOR_VERSION_C 4 #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_MINOR_VERSION_C 4 #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_REVISION_VERSION_C 0 #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_MAJOR_VERSION_C 0 #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_MINOR_VERSION_C 9 #define LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_PATCH_VERSION_C 0 /*================================================================================================== FILE VERSION CHECKS ==================================================================================================*/ /* Checks against Lpuart_Uart_Ip_Types.h */ #if (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_VENDOR_ID_C != LPUART_UART_IP_TYPES_VENDOR_ID) #error "Lpuart_Uart_Ip_BOARD_InitPeripherals_PBcfg.c and Lpuart_Uart_Ip_Types.h have different vendor ids" #endif #if ((LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_MAJOR_VERSION_C != LPUART_UART_IP_TYPES_AR_RELEASE_MAJOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_MINOR_VERSION_C != LPUART_UART_IP_TYPES_AR_RELEASE_MINOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_REVISION_VERSION_C != LPUART_UART_IP_TYPES_AR_RELEASE_REVISION_VERSION)) #error "AUTOSAR Version Numbers of Lpuart_Uart_Ip_BOARD_InitPeripherals_PBcfg.c and Lpuart_Uart_Ip_Types.h are different" #endif #if ((LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_MAJOR_VERSION_C != LPUART_UART_IP_TYPES_SW_MAJOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_MINOR_VERSION_C != LPUART_UART_IP_TYPES_SW_MINOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_PATCH_VERSION_C != LPUART_UART_IP_TYPES_SW_PATCH_VERSION)) #error "Software Version Numbers of Lpuart_Uart_Ip_BOARD_InitPeripherals_PBcfg.c and Lpuart_Uart_Ip_Types.h are different" #endif /* Checks against Lpuart_Uart_Ip_Cfg.h */ #if (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_VENDOR_ID_C != LPUART_UART_IP_CFG_VENDOR_ID) #error "Lpuart_Uart_Ip_BOARD_InitPeripherals_PBcfg.c and Lpuart_Uart_Ip_Cfg.h have different vendor ids" #endif #if ((LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_MAJOR_VERSION_C != LPUART_UART_IP_CFG_AR_RELEASE_MAJOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_MINOR_VERSION_C != LPUART_UART_IP_CFG_AR_RELEASE_MINOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_AR_RELEASE_REVISION_VERSION_C != LPUART_UART_IP_CFG_AR_RELEASE_REVISION_VERSION)) #error "AUTOSAR Version Numbers of Lpuart_Uart_Ip_BOARD_InitPeripherals_PBcfg.c and Lpuart_Uart_Ip_Cfg.h are different" #endif #if ((LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_MAJOR_VERSION_C != LPUART_UART_IP_CFG_SW_MAJOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_MINOR_VERSION_C != LPUART_UART_IP_CFG_SW_MINOR_VERSION)|| \ (LPUART_UART_IP_PBCFG_BOARD_INITPERIPHERALS_SW_PATCH_VERSION_C != LPUART_UART_IP_CFG_SW_PATCH_VERSION)) #error "Software Version Numbers of Lpuart_Uart_Ip_BOARD_InitPeripherals_PBcfg.c and Lpuart_Uart_Ip_Cfg.h are different" #endif /*================================================================================================== LOCAL TYPEDEFS (STRUCTURES, UNIONS, ENUMS) ==================================================================================================*/ /*================================================================================================== LOCAL CONSTANTS ==================================================================================================*/ /*================================================================================================== * LOCAL MACROS ==================================================================================================*/ /*================================================================================================== LOCAL VARIABLES ==================================================================================================*/ /*================================================================================================== GLOBAL CONSTANTS ==================================================================================================*/ #define UART_START_SEC_VAR_NO_INIT_UNSPECIFIED_NO_CACHEABLE #include "Uart_MemMap.h" extern Lpuart_Uart_Ip_StateStructureType Lpuart_Uart_Ip_apStateStructure[LPUART_UART_IP_NUMBER_OF_INSTANCES]; #define UART_STOP_SEC_VAR_NO_INIT_UNSPECIFIED_NO_CACHEABLE #include "Uart_MemMap.h" #define UART_START_SEC_CONFIG_DATA_UNSPECIFIED #include "Uart_MemMap.h" /** * @brief Hardware configuration for Lpuart Uart Hardware - Configuration: * * @api */ const Lpuart_Uart_Ip_UserConfigType Lpuart_Uart_Ip_pHwConfigPB_0_BOARD_INITPERIPHERALS = { /* Actual baudrate */ 115440, /* Baudrate mantissa*/ 33U, /* Baudrate Divisor*/ 21U, /* Parity type */ LPUART_UART_IP_PARITY_DISABLED, /* Number of stop bits, 1 stop bit (default) or 2 stop bits */ LPUART_UART_IP_ONE_STOP_BIT, /* Number of bits per transmitted/received word */ LPUART_UART_IP_8_BITS_PER_CHAR, /* Type of UART transfer (interrupt/dma based) */ LPUART_UART_IP_USING_INTERRUPTS, /* Callback to invoke for data receive.*/ UART0_RX_Callback, /* Receive callback parameter pointer.*/ NULL_PTR, /* Callback to invoke for data send */ NULL_PTR, /* Transmit callback parameter pointer.*/ NULL_PTR, /* Callback to invoke on error conditions */ NULL_PTR, /* Error callback parameter pointer */ NULL_PTR, #if (LPUART_UART_IP_HAS_DMA_ENABLED == STD_ON) /* DMA channel number for DMA-based rx. */ 255, /* DMA channel number for DMA-based tx. */ 255, #endif /* Runtime state structure refference */ &Lpuart_Uart_Ip_apStateStructure[0U] }; const Lpuart_Uart_Ip_UserConfigType Lpuart_Uart_Ip_pHwConfigPB_2_BOARD_INITPERIPHERALS = { /* Actual baudrate */ 115942, /* Baudrate mantissa*/ 15U, /* Baudrate Divisor*/ 23U, /* Parity type */ LPUART_UART_IP_PARITY_DISABLED, /* Number of stop bits, 1 stop bit (default) or 2 stop bits */ LPUART_UART_IP_ONE_STOP_BIT, /* Number of bits per transmitted/received word */ LPUART_UART_IP_8_BITS_PER_CHAR, /* Type of UART transfer (interrupt/dma based) */ LPUART_UART_IP_USING_INTERRUPTS, /* Callback to invoke for data receive.*/ UART2_RX_Callback, /* Receive callback parameter pointer.*/ NULL_PTR, /* Callback to invoke for data send */ NULL_PTR, /* Transmit callback parameter pointer.*/ NULL_PTR, /* Callback to invoke on error conditions */ NULL_PTR, /* Error callback parameter pointer */ NULL_PTR, #if (LPUART_UART_IP_HAS_DMA_ENABLED == STD_ON) /* DMA channel number for DMA-based rx. */ 255, /* DMA channel number for DMA-based tx. */ 255, #endif /* Runtime state structure refference */ &Lpuart_Uart_Ip_apStateStructure[2U] }; const Lpuart_Uart_Ip_UserConfigType Lpuart_Uart_Ip_pHwConfigPB_10_BOARD_INITPERIPHERALS = { /* Actual baudrate */ 115942, /* Baudrate mantissa*/ 15U, /* Baudrate Divisor*/ 23U, /* Parity type */ LPUART_UART_IP_PARITY_DISABLED, /* Number of stop bits, 1 stop bit (default) or 2 stop bits */ LPUART_UART_IP_ONE_STOP_BIT, /* Number of bits per transmitted/received word */ LPUART_UART_IP_8_BITS_PER_CHAR, /* Type of UART transfer (interrupt/dma based) */ LPUART_UART_IP_USING_INTERRUPTS, /* Callback to invoke for data receive.*/ UART10_RX_Callback, /* Receive callback parameter pointer.*/ NULL_PTR, /* Callback to invoke for data send */ NULL_PTR, /* Transmit callback parameter pointer.*/ NULL_PTR, /* Callback to invoke on error conditions */ NULL_PTR, /* Error callback parameter pointer */ NULL_PTR, #if (LPUART_UART_IP_HAS_DMA_ENABLED == STD_ON) /* DMA channel number for DMA-based rx. */ 255, /* DMA channel number for DMA-based tx. */ 255, #endif /* Runtime state structure refference */ &Lpuart_Uart_Ip_apStateStructure[10U] }; const Lpuart_Uart_Ip_UserConfigType Lpuart_Uart_Ip_pHwConfigPB_13_BOARD_INITPERIPHERALS = { /* Actual baudrate */ 115942, /* Baudrate mantissa*/ 15U, /* Baudrate Divisor*/ 23U, /* Parity type */ LPUART_UART_IP_PARITY_DISABLED, /* Number of stop bits, 1 stop bit (default) or 2 stop bits */ LPUART_UART_IP_ONE_STOP_BIT, /* Number of bits per transmitted/received word */ LPUART_UART_IP_8_BITS_PER_CHAR, /* Type of UART transfer (interrupt/dma based) */ LPUART_UART_IP_USING_INTERRUPTS, /* Callback to invoke for data receive.*/ UART13_RX_Callback, /* Receive callback parameter pointer.*/ NULL_PTR, /* Callback to invoke for data send */ NULL_PTR, /* Transmit callback parameter pointer.*/ NULL_PTR, /* Callback to invoke on error conditions */ NULL_PTR, /* Error callback parameter pointer */ NULL_PTR, #if (LPUART_UART_IP_HAS_DMA_ENABLED == STD_ON) /* DMA channel number for DMA-based rx. */ 255, /* DMA channel number for DMA-based tx. */ 255, #endif /* Runtime state structure refference */ &Lpuart_Uart_Ip_apStateStructure[13U] }; #define UART_STOP_SEC_CONFIG_DATA_UNSPECIFIED #include "Uart_MemMap.h" /*================================================================================================== GLOBAL VARIABLES ==================================================================================================*/ /*================================================================================================== LOCAL FUNCTION PROTOTYPES ==================================================================================================*/ /*================================================================================================== LOCAL FUNCTIONS ==================================================================================================*/ /*================================================================================================== GLOBAL FUNCTIONS ==================================================================================================*/ #ifdef __cplusplus } /** @} */ #endif